passAsFile passes the values of Nix bindings to the builder as
files, so if those values contained references, they wouldn't end up
in the inputDerivation output. To fix that, append the contents of
every such passed file to the output.
We only have shell builtins in this derivation, so we can't use cat.
The only way I know of appending the contents of one file to another
using only shell builtins is as I've done here, but it requires
putting the contents of the file on echo's argv. This might end up
causing problems with large files. Regardless, I think we should try
this, as a failure is better than silently producing an incorrect
result like the previous behavior.
`nix-2.4+` automatically filters `__contentAddressed` out of the
environment. But not `nix-2.3`. This make `.drv` to differ between
unset and `__contentAddressed = false` derivations.
This change makes them equal by filtering out `__contentAddressed`
unless it's set to `true`.
The NIX_LIB64|32_IN_SELF_RPATH environment variables control whether
to add lib64 and lib32 to rpaths. However, they're set depending
on the build paltform, not the target platform and thus their values
are incorrect for for cross-builds.
On the other hand, setting them according to the build platform introduce
pointless differences in build outputs; see #221350 for details.
This change fixes the issues by boldly removes the NIX_LIB*_IN_SELF_RPATH
facility altogether, in the hope that it is no longer necessary. They
were introduced in 2009, long before nixpkgs had good support for
cross-builds.
Fixes#221350
See https://github.com/NixOS/nixpkgs/pull/222792#pullrequestreview-1356114111
You can't just `lib.filter _ lib.systems.all` -- that throws away
important information, leading to nixpkgs disagreeing with itself
like this:
```
$ NIXPKGS_ALLOW_BROKEN=1 nix-instantiate . -A pkgsStatic.systemd
error: Package ‘systemd-252.5’ in ... is only supported on ... x86_64-linux but not on requested x86_64-linux, refusing to evaluate.
```
After:
```
$ NIXPKGS_ALLOW_BROKEN=1 nix-instantiate . -A pkgsStatic.systemd
error: Package ‘systemd-252.5’ in ... is not available on the requested hostPlatform:
hostPlatform.config = "x86_64-unknown-linux-musl"
package.meta.platforms = [
"aarch64-linux"
"armv5tel-linux"
"armv6l-linux"
"armv7a-linux"
"armv7l-linux"
"i686-linux"
"m68k-linux"
"microblaze-linux"
"microblazeel-linux"
"mipsel-linux"
"mips64el-linux"
"powerpc64-linux"
"powerpc64le-linux"
"riscv32-linux"
"riscv64-linux"
"s390-linux"
"s390x-linux"
"x86_64-linux"
]
package.meta.badPlatforms = [
{
isStatic = true;
parsed = { };
}
]
, refusing to evaluate.
```
The primary motivating example is openssl:
Before the change full package build took 1m54s minutes.
After the change full package build takes 59s.
About a 2x speedup.
The difference is visible because openssl builds hundreds of manpages
spawning a perl process per manual in `install` phase. Such a workload
is very easy to parallelize.
Another example would be `autotools`+`libtool` based build system where
install step requires relinking. The more binaries there are to relink
the more gain it will be to do it in parallel.
The change enables parallel installs by default only for buiilds that
already have parallel builds enabled. There is a high chance those build
systems already handle parallelism well but some packages will fail.
Consistently propagated the enableParallelBuilding to:
- cmake (enabled by default, similar to builds)
- ninja (set parallelism explicitly, don't rely on default)
- bmake (enable when requested)
- scons (enable when requested)
- meson (set parallelism explicitly, don't rely on default)
- waf (set parallelism explicitly, don't rely on default)
- qmake-4/5/6 (enable by default, similar to builds)
- xorg (always enable, similar to builds)
This was disabled here: b86e62d30d (diff-282a02cc3871874f16401347d8fadc90d59d7ab11f6a99eaa5173c3867e1a160)
h/t to @teh: b86e62d30d (commitcomment-77916294)
for pointing out that the failure that @matthewbauer was
seeing was caused by the `separate-debug-info.sh` `build-id` length
requirement that #146275 will relax
`lld` has had `--build-id` support dating back to LLVM4: https://reviews.llvm.org/D18091
This predates every `llvmPackages_` version currently in nixpkgs (and
certainly every version actually still used in `useLLVM` stdenvs) so
with the previous commit (asking `ld` for sufficiently long SHA1 hashes)
I think we can safely enable `separateDebugInfo` when using LLVM
bintools.
See docs.
Follow-up work:
- Existing packages should be converted
- `defaultPkgConfigPackages` should assert on `meta.pkgConfigModules`
and let `tests.pkg-config` alone test the build results.
CC @sternenseemann
Co-authored-by: Robert Hensing <roberth@users.noreply.github.com>
platform.uname.processor seems to be what we want in many more cases
than what we were using before — it does the right thing for aarch64,
x86_64, riscv32, riscv64, mips, mips64, powerpc, and powerpc64 (the
latter three of which were broken before).
This fixes cross-compilation of systemd for PowerPC/POWER platforms.
Derivations listed as disallowedReferences or disallowedRequisites,
currently end up as build-time dependencies.
This is problematic since the disallowed derivations will be built by nix as
build-time dependencies, while those derivations might take a very long time
to build, or might not even build successfully on the platform used.
However, in order to scan for disallowed references in the final output,
knowing the out path is sufficient, and the out path can be calculated from
the derivation without needing to build it, saving time and resources.
While the problem is less severe for allowedReferences and allowedRequisites,
since we want the derivation to be built eventually, we would still like to
get the error early and without having to wait while nix builds a derivation
that might not be used (e.g. if we listed the wrong one).
Some other packages, for example ruby gems via buildRubyGem, use a
variable called "type" internally, which is overwritten here and
causes failures like:
failure: $gempkg path unspecified
Fix for changes in 11c3127e38.
this is intentional to support both structuredAttrs and non
In pkgs/stdenv/generic/setup.sh line 614:
for pkg in ${depsBuildBuild[@]} ${depsBuildBuildPropagated[@]}; do
^------------------^ SC2068 (error): Double quote array expansions to avoid re-splitting elements.
In pkgs/stdenv/generic/setup.sh line 521:
local varRef="$varVar[$((targetOffset - hostOffset))]"
^-- SC1087 (error): Use braces when expanding arrays, e.g. ${array[idx]} (or ${var}[.. to quiet).
exit -1 == exit 255 but we don't have a reason to use 255
In pkgs/stdenv/generic/setup.sh line 518:
(( hostOffset <= targetOffset )) || exit -1
^-- SC2242 (error): Can only exit with status 0-255. Other data should be wri
tten to stdout/stderr.
we use [*] to support structuredAttrs and non
In pkgs/stdenv/generic/setup.sh line 1542:
for curPhase in ${phases[*]}; do
^----------^ SC2048 (warning): Use "${array[@]}" (with quotes) to prevent whitespace problems.
In pkgs/stdenv/generic/setup.sh line 101:
source "$hookName"
^---------^ SC1090 (warning): ShellCheck can't follow non-constant source. Use a directive to specify location.
In pkgs/stdenv/generic/setup.sh line 166:
mkdir -p "$out/nix-support"
^--^ SC2154 (warning): out is referenced but not assigned.
In pkgs/stdenv/generic/setup.sh line 407:
PATH=
^--^ SC2123 (warning): PATH is the shell search path. Use another name.
In pkgs/stdenv/generic/setup.sh line 452:
declare -a pkgBuildAccumVars=(pkgsBuildBuild pkgsBuildHost pkgsBuildTarget)
^---------------^ SC2034 (warning): pkgBuildAccumVars appears unused. Verify use (or export if used e
xternally).
because pkgBuildAccumVars is used
In pkgs/stdenv/generic/setup.sh line 235:
nameref="$* ${nameref-}"
^-----^ SC2178 (warning): Variable was used as an array but is now assigned a string.
because we theres a useArray conditional
In pkgs/stdenv/generic/setup.sh line 36:
: ${outputs:=out}
^-------------^ SC2223 (info): This default assignment may cause DoS due to globbing. Quote it.
`hasUnsupportedPlatform` was not updated with #37395, so it does not
understand attrsets in `meta.[bad]platforms`. In particular,
attrsets in `meta.badPlatforms` will "fail open" and be ignored.
Let's use `lib.meta.availableOn` instead of duplicating its logic.
Thanks to @alyssais for [noticing][1].
[1][https://github.com/NixOS/nixpkgs/pull/194148#discussion_r990817610]
Co-authored-by: sternenseemann <sternenseemann@systemli.org>
otherwise the build just fails with 'make: *** No rule to make target 'install'. Stop.'
and update buildPhase message
i don't know if the 'makefile may have been created in buildPhase' is
true but i guess it might be possible
The documentation for `meta.sourceProvenance` in
`doc/stdenv/meta.chapter.md` says: "the `meta.sourceProvenance`
attribute should be a list containing one or more value..."
Let's update check-meta.nix to require that `meta.sourceProvenance` is
a list, as the documentation says, rather than a single element.
Adding two extra keystrokes `[` and `]` when filling out this field is
an insignificant burden for package authors, and being able to assume
that the `meta.sourceProvenance` field is always a list greatly
simplifies any code that acts on the value of this field.
Since `meta.sourceProvenance` was just merged a few hours ago now is
the easiest time to fix this: nobody is using the feature yet.
Without the change we don't propagate `enableParallelBuilding = true`
and leave most builds sequential.
Noticed on `mythtv` package which did not specify parallelism and
`config.enableParallelBuildingByDefault = true` had no effect.
Derivations not using `__structuredAttrs` should not attempt to set
environment variables from `env`.
Derivations using `__structuredAttrs` should fail if `env` is not
exportable.
Co-authored-by: Robin Gloster <mail@glob.in>
stdenv: print message if structuredAttrs is enabled
stdenv: add _append
reduces the chance of a user doing it wrong
fix nix develop issue
output hooks don't work yet in nix develop though
making $outputs be the same on non-structuredAttrs and structuredAttrs
is too much trouble.
lets instead make a function that gets the output names
reading environment file '/nix/store/2x7m69a2sm2kh0r6v0q5s9z1dh41m4xf-xz-5.2.5-env-bin'
nix: src/nix/develop.cc:299: std::string Common::makeRcScript(nix::ref<nix::Store>, const BuildEnvironment&, const Path&): Assertion `outputs != buildEnvironment.vars.end()' failed.
use a function to get all output names instead of using $outputs
copy env functionality from https://github.com/NixOS/nixpkgs/pull/76732/commits
In specific cases, combining the `checkMeta` and `checkMetaRecursively`
config options would result in `error: infinite recursion encountered`
fixes#193296
