`netboot-update` failed with an opaque curl usage error whenever the
`installer` tag advanced past a build that had not published assets:
the `jq` select found no matching asset, and the empty result was
passed straight to `curl` as the URL. Report the missing asset (and
an unresolvable tag) instead.
The unit also had its network dependency inverted, being `wantedBy`
network-online.target rather than wanting and ordering after it. Fix
the idiom and keep it in the boot transaction via multi-user.target.
On river that is not enough on its own, because the WAN is a pppd
interface that networkd's wait-online knows nothing about, so
network-online.target is reached well before there is a route
off-site. Gate the service on wan-online.target there, following the
same wantedBy + partOf idiom as ipsec, which also re-runs the fetch
whenever the link returns.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
With a single ONT the ISP's VLAN 10 is unique on the fabric, so there's no
need to swap it to a private fabric VLAN. Carry pon-isp (10) trunked straight
through the switches to river and run PPPoE directly on it, dropping the old
wan-pon-isp (141) translation. The ONT's untagged management is PVID'd onto
wan-pon-ont (140) at its edge switch (brian).
wan-pon-isp (141) is kept as a constant, reserved for the future multi-ONT
case where per-port VLAN translation disambiguates two VLAN-10 ONTs.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Digiweb's ONT delivers its untagged management traffic (192.168.100.0/24)
alongside the tagged ISP VLAN 10. The switch feeding river now tags the ONT's
untagged port as wan-pon-ont (140) and swaps the ISP VLAN 10 to wan-pon-isp
(141) on ingress, so both reach river single-tagged: river takes an address in
the ONT's /24 on 140 to reach its web UI, and PPPoE runs directly on 141.
Replaces the old QinQ-into-131 (wanStacked) transport; the wan-pon (131) VLAN
constant is dropped and prefixes.ont added.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Digiweb assigned river a static IPv4 (84.203.124.128). Point river's
public address at it and have pppd actively request it as the IPCP local
address (local:remote form) rather than passively accepting whatever the
peer offers via noipdefault. The address stays sourced from the
routersPubV4 constant, so the ipsec l2 mesh peer, the nft DNS redirect,
and the cross-router route all follow.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Digiweb's BRAS answers PADI only on a single-tagged ISP VLAN (pon-isp,
10); the double-stacked wan-pon (131) transport never got a PADO because
the UniFi access switch can't push the outer tag onto already-tagged
ingress frames (no QinQ/tag-stacking). Attach VLAN 10 directly to the
physical `lan` link for now.
Kept reversible via a `wanStacked` flag: flip it back to true to restore
the 131->10 stack once a QinQ-capable device sits in front of the ONT.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The outer WAN VLAN carries the inner VLAN's frames, whose 4B 802.1Q tag
counts as payload at this layer. To fit the inner's 1508B baby-jumbo
payload plus that tag it needs 1512, not 1508. Harmless before only
because the physical `lan` (9000) absorbed the extra bytes; this makes
the outer's MTU literally reflect what it transports.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
river's WAN moves to a PPPoE session (Digiweb, over VLAN 10 with baby-jumbo
1508 MTU) driven by pppd, with its ip-up/ip-down hooks toggling a new
wan-online.target. stream keeps its DHCP WAN, so the existing 50-wan /
50-wan-ifb networkd config moves out of routing-common into stream, and the
shared consumers (ipsec, ipv6-clear-default-route) now attach to
wan-online.target instead of depending on systemd-networkd-wait-online@wan
directly.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
jackos1998