New bare-metal box headed for Nikhef, intended to take over most of
estuary's colony edge routing. This is the bootstrap config only: the
hardware, the single-NVMe ESP + LVM layout, and enough networking to
boot and be reachable.
It is being staged at home before it is racked, so it has no colony
assignments yet. Every 2.5G port takes DHCP and whichever one is
patched in brings the box up; kea registers the DHCP hostname, so the
deploy node points at portcullis.dyn.h.nul.ie until there is a real
colony FQDN for it.
The host key was adopted from the installer session and seeded onto
the persist volume before first boot, so my.secrets.key could be set
up front -- which makes portcullis a recipient of the user-passwd
secret that my.user declares for every box.
Documented with a box page, a row in the colony site index, and a note
in the colony section of networking.md that the topology is expected
to change once portcullis takes over from estuary.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Notes from bench-testing the Quectel RM500U-EA on tower, bought to
eventually replace stream's Virgin Media WAN. Like the switches and
APs, the module is configured out-of-band and is not referenced by
the flake.
Records what it takes to connect at all: the module must be switched
from its stock NCM composition to MBIM, since under NCM the PDP
context activates but the cdc_ncm link never raises carrier; and the
connect only succeeds with the network-expanded APN read off the
default-attach bearer, as IPv4.
Also flags the two consequences for stream: the SIM is CGNAT so it
cannot carry the public lease stream's WAN currently publishes, and
the bearer reports a /8 that would cover Tailscale's 100.64.0.0/10
if configured literally.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
jim, dave and the vibe AP are pure L2, but RouterOS ships ip-forward and
IPv6 forward on, and with IPv6 forwarding enabled it also advertises
itself as a default router. After the 7.18 -> 7.23 upgrade clients began
picking up the switches as IPv6 default routers alongside river.
Replace the earlier advertise-dns framing (which only strips RA options,
not the router lifetime) with the actual requirement: ip-forward=no,
IPv6 forward=no, accept-router-advertisements=no, ra-lifetime=0, and a
re-check after every RouterOS upgrade.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
Generate forward and reverse record tables from authoritative AXFRs
while preserving handwritten Markdown outside per-zone markers. Run the
generator in CI and link the reference from the relevant docs.
Place physical hardware inventories and VPS resource allocations near
the top of each box page, while leaving broader platform details in
their topical sections.
jackos1998